TOYOTA LAND CRUISER - PRADO 120 Series Sep.02-Oct.09 excl. Grande

Product Information

Bilstein

Designed specifically to suit off-road vehicles, the BILSTEIN B6 Offroad gas-pressure shock absorber is the perfect suspension solution. This version of the BILSTEIN B6 shock absorber has been adapted to fulfil Australian 4 Wheel Drive requirements. The BILSTEIN B6 Offroad shock absorber has been developed to reduce the kind of undesirable handling dynamics such as uncontrolled movements that are so inherent in 4WDs thanks to their high structure. 

Using a 46mm piston in its mono-tube design, the BILSTEIN B6 Offroad shock absorber offers greater performance reserves and an extended service life, even when put through strenuous driving conditions, such as towing or off-road applications. You can expect optimum road adhesion and enhanced lane change stability in day-to-day applications as well as extreme situations thanks to Bilstein’s precise damper settings, both aspects that often leave a lot to be desired in large 4WDs. 

King Springs

King Springs exclusively use high quality, high stress X5K spring steel. This new generation steel allows King Springs to further improve many of their existing designs by reducing the amount of steel required in a spring, making it substantially lighter (by approximately 30%) and reducing the solid height therefore increasing travel. Being of particular benefit at all top levels of Motorsport, this new high stress material was introduced to the leading v8 super car teams (inc DJR/TP, FTR & NISSAN) in early 2007 giving a hugely successful endorsement of its characteristics & proven durability.

Although considerably expensive, King Springs have introduced this new high stress steel to their passenger car and 4wd designs which benefit the most at no extra cost to the consumer. As of now all King Springs manufactured coils are now in X5K material.

AirBag Man - Air Suspension Helper Kit for Coil Springs - High Pressure

Airbag kit includes two airbags, high pressure sleeves, airbag end protectors, air line tubing and two inflation valves, full instructions included.

High Pressure kit for Heavy Towing and/or vehicles being loaded to Maximum Allowable Weights.

Airbags are fitted inside coil springs to provide load carrying assistance and are easily inflated or deflated to cater for the vehicle loading.

Super Pro - Differential Drop Kit

Suits Lifted vehicles. The kit has been designed in such a way that allows the original bash plate to be refitted. It is supplied complete with all required spacers, bolts, washers and nuts. When lifting the Prado 120, 150 or Hilux 4WD 2005+, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots that will lead to splitting and premature failure of the CV. This wear is accelerated further if larger & wider wheels and tyres are fitted.This bolt on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm. Reducing the angles the CV joints are operating at will help avoid the expensive replacement costs of CV's and boots.

Stone Guards

Stone Guards are attached to the lower section of the rear shocks to help protect them from damage primarily from rocks being thrown up by the front wheels.

SKU PRADO120BILKING
Brand Bilstein

Be The First To Review This Product!

Help other BushSkinz 4x4 users shop smarter by writing reviews for products you have purchased.

Write a product review