Dobinsons 45mm Raised Rear Coil Springs 150–250kg – Toyota LandCruiser Prado 250 Series

Heavy-duty variable-rate rear coil springs designed to give your Prado 250 increased ride height and support for moderate constant rear-end loads.

Upgrade the rear suspension of your Toyota LandCruiser Prado 250 Series with Dobinsons C59-819V rear coil springs. Designed for Prado 250 models from 2024 onwards, these variable-rate coil springs provide approximately 45mm of raised suspension height and are designed for vehicles carrying a 150–250kg constant rear load.

Whether you're carrying rear drawers, a fridge, camping equipment, recovery gear or other touring accessories, choosing a spring matched to your vehicle's actual constant rear load is essential for maintaining ride height, suspension control and overall vehicle performance.

Sold as a pair – 2 rear coil springs.

Shipping charges as quoted at checkout - Remote/expensive locations may incur additional shipping charges.

Key Features & Benefits

• Approximately 45mm raised height provides additional rear suspension lift compared with standard-height springs.
• 150–250kg constant-load rating is designed for Prado 250s carrying moderate permanent rear-end loads.
• Variable-rate spring design provides a balance between load-carrying capability, ride quality and suspension performance.
• Purpose-built for the Toyota LandCruiser Prado 250 Series for a vehicle-specific suspension upgrade.
• Designed for 2024 onwards Prado 250 models.
• Heavy-duty Dobinsons construction designed for demanding Australian touring and off-road conditions.
• Suitable for touring vehicles fitted with common rear accessories and equipment.
• Sold as a matched pair to maintain balanced rear suspension performance.

Why Choose Dobinsons Rear Coil Springs for Your Prado 250?

The rear suspension of a Prado 250 can quickly become more heavily loaded once touring accessories and equipment are added. Rear drawers, fridges, camping gear, recovery equipment and other permanently carried accessories can all increase the vehicle's constant rear load.

The Dobinsons C59-819V rear coil springs are designed for Prado 250s carrying approximately 150–250kg of constant rear-end load, providing additional support to help maintain appropriate ride height and suspension performance.

With approximately 45mm of raised height, these springs are also suited to Prado 250 touring and off-road builds where additional rear clearance and suspension lift are required.

The variable-rate design helps provide a balance between load support and suspension behaviour, making the C59-819V a strong option for Prado 250 owners carrying moderate permanent touring weight without requiring the much heavier spring rates designed for fully loaded vehicles.

Built for the Toyota LandCruiser Prado 250 Series

The Dobinsons C59-819V rear coil springs are specifically designed for the Toyota LandCruiser Prado 250 Series from 2024 onwards.

With approximately 45mm raised height and a 150–250kg constant-load rating, the C59-819V is well suited to Prado 250 owners building a touring or off-road vehicle with a moderate amount of permanently fitted rear equipment.

Selecting the correct spring based on your vehicle's actual constant load is important. A spring that is too light may result in reduced ride height and insufficient support, while a spring that is unnecessarily heavy can adversely affect ride quality when the vehicle is lightly loaded.

BushSkinz Expert Tip

Recommended Setup

For the best result, rear coil springs should be selected as part of a complete suspension system rather than as an isolated upgrade.

For a Prado 250 being built for touring or off-road use, we recommend considering:

• Dobinsons C59-819V 45mm Raised Rear Coil Springs
• 150–250kg constant rear load
• Dobinsons MRR 3-Way Adjustable Remote Reservoir Rear Shock Absorbers
• Dobinsons Prado 250 50mm Front Coil Springs
• Dobinsons MRR 3-Way Adjustable Remote Reservoir Front Struts
• Professional suspension installation
• Wheel alignment following installation

Correct spring selection should always be based on the vehicle's actual accessory and constant load rather than simply choosing a spring based on the desired lift height.

Need help choosing the right Prado 250 suspension setup? Contact BushSkinz 4x4 and we can help you select components to suit your vehicle's intended use and load.

Technical Specifications

What's Included?

• 2 x Dobinsons C59-819V Rear Coil Springs

Sold as a pair.

Shock absorbers and other suspension components are not included unless specifically stated in the product listing.

Frequently Asked Questions

What Prado 250 models do these springs fit?

The Dobinsons C59-819V rear coil springs are designed for the Toyota LandCruiser Prado 250 Series from 2024 onwards.

How much lift do these springs provide?

Dobinsons lists the C59-819V as providing approximately 45mm of raised height.

What load are these springs designed for?

The C59-819V is designed for approximately 150–250kg of constant rear load. Constant load refers to weight that is consistently carried by the vehicle rather than occasional or temporary cargo.

Are these springs variable rate?

Yes. The C59-819V uses a variable-rate spring design, helping provide a balance between load support and suspension performance.

Are these springs sold individually?

No. The C59-819V is supplied as a pair of rear coil springs. One pair is required per vehicle.

Are these suitable for a Prado 250 with drawers, a fridge and touring equipment?

They can be a suitable option where your Prado's total constant rear load falls within the 150–250kg range. We recommend calculating the actual weight of permanently fitted accessories before selecting the spring.

What if my Prado carries more than 250kg of constant rear load?

If your Prado 250 carries more than approximately 250kg of constant rear weight, a heavier-rated rear spring may be more appropriate.

For substantially heavier touring builds, consider the Dobinsons C59-821V 350–550kg Prado 250 Rear Coil Springs.

Can I use these with Dobinsons MRR rear shock absorbers?

Yes. The C59-819V can form part of a matched Dobinsons suspension setup using compatible Dobinsons MRR rear shock absorbers. Matching the spring rate and shock absorber to the vehicle's actual load and intended use is recommended.

Can I use these with Dobinsons MRR front struts?

Yes. The C59-819V rear springs can be used as part of a complete Prado 250 suspension setup with compatible Dobinsons front suspension components, including the Dobinsons MRR 3-Way Adjustable Remote Reservoir Front Struts.

Will I need a wheel alignment after fitting?

Yes. A professional wheel alignment is recommended after installing raised suspension components.

Dobinsons Warranty

Dobinsons Spring & Suspension provides a 2-year warranty on coil springs, subject to their warranty terms and conditions.

Dobinsons' coil spring warranty covers faulty manufacture, breakage and sagging in accordance with their published warranty conditions.

Dobinsons also states that suspension products are not covered where the vehicle is used in extreme sports or competition racing, or where the vehicle produces 50mm or more of lift. Coil springs and shock absorbers are also not covered where additional coil or strut spacers are fitted to a coil-over type assembly.

The warranty excludes products that have been incorrectly installed, modified, misused, abused, neglected, altered or subjected to abnormal conditions.

For complete warranty conditions, please refer to the Dobinsons Spring & Suspension Warranty Terms & Conditions.

Upgrade Your Prado 250 Suspension

If you're building your Toyota LandCruiser Prado 250 for touring, towing or off-road use, selecting the correct rear spring rate is one of the most important parts of getting the suspension setup right.

The Dobinsons C59-819V rear coil springs provide approximately 45mm of raised height and are designed for a 150–250kg constant rear load, making them a strong option for Prado 250s carrying a moderate touring setup.

Pair them with correctly matched Dobinsons front coil springs, Dobinsons MRR front struts and compatible rear shock absorbers to create a complete Prado 250 suspension setup designed around your vehicle's actual load and intended use.

Build your Prado 250 for the way you actually use it – and choose your spring rate accordingly.

Dobinsons C59-819V at a Glance

45mm Raised Height | 150–250kg Constant Load | Variable Rate | Rear | Sold as a Pair | Prado 250 2024-Onwards