Dobinsons 45mm Raised Rear Coil Springs 350–550kg – Toyota LandCruiser Prado 250 Series

Heavy-duty variable-rate rear coil springs designed to give your Prado 250 increased ride height and support for substantial constant rear-end loads.

Upgrade the rear suspension of your Toyota LandCruiser Prado 250 Series with Dobinsons C59-821V rear coil springs. Designed for Prado 250 models from 2024 onwards, these variable-rate coil springs provide approximately 45mm of raised suspension height and are designed for vehicles carrying a 350–550kg constant rear load.

Whether you're carrying rear drawers, a fridge, camping equipment, recovery gear, a spare wheel upgrade or other permanently fitted touring equipment, choosing a spring matched to your vehicle's constant rear load is essential for maintaining ride height, suspension control and overall vehicle performance.

Sold as a pair – 2 rear coil springs.

Shipping charges as quoted at checkout - Remote/expensive locations may incur additional shipping charges.

Key Features & Benefits

• Approximately 45mm raised height provides additional rear suspension lift compared with standard-height springs.
• 350–550kg constant-load rating is designed for heavily equipped Prado 250 touring and off-road vehicles.
• Variable-rate spring design provides a balance between load-carrying capability and suspension performance.
• Purpose-built for the Toyota LandCruiser Prado 250 Series for a vehicle-specific suspension upgrade.
• Designed for 2024 onwards Prado 250 models.
• Heavy-duty Dobinsons construction designed for demanding Australian touring and off-road conditions.
• Suitable for Prado 250s carrying substantial constant rear-end weight.
• Sold as a matched pair to maintain balanced rear suspension performance.

Why Choose Dobinsons Rear Coil Springs for Your Prado 250?

The rear suspension of a Prado 250 can become heavily loaded once touring accessories and equipment are added. Rear drawers, fridges, spare wheel upgrades, camping equipment, recovery gear and other permanently carried equipment can significantly increase the vehicle's constant rear load.

The Dobinsons C59-821V rear coil springs are designed for Prado 250s carrying 350–550kg of constant rear-end load, providing additional support to help maintain appropriate ride height and suspension performance.

With approximately 45mm of raised height, these springs are also suited to Prado 250 touring and off-road builds where additional rear clearance and suspension lift are required.

The variable-rate design provides a useful balance between load-carrying ability and suspension behaviour, making these springs a strong option for Prado 250s that regularly carry a substantial touring load.

Built for the Toyota LandCruiser Prado 250 Series

The Dobinsons C59-821V rear coil springs are specifically listed for the Toyota LandCruiser Prado 250 Series from 2024 onwards.

With approximately 45mm raised height and a 350–550kg constant-load rating, the C59-821V is designed for Prado 250 owners building a vehicle for serious touring, towing and off-road use while carrying significant permanent or constant rear-end weight.

Selecting the correct spring based on the vehicle's actual constant load is important. A spring that is too light can result in reduced ride height and compromised suspension performance, while unnecessarily high spring rates can adversely affect ride quality when the vehicle is lightly loaded.

BushSkinz Expert Tip

Choose your rear spring based on the weight you actually carry.

The 350–550kg rating of the C59-821V is a substantial constant-load rating, so these springs are intended for Prado 250s carrying significant permanent rear-end weight.

Before selecting your springs, consider everything that is permanently fitted or carried in the rear of the vehicle, including:

• Rear drawer systems
• Fridges and fridge slides
• Spare wheel upgrades
• Camping and touring equipment
• Recovery equipment
• Long-range fuel tanks
• Rear storage systems
• Other permanently fitted accessories

For the best result, weigh your vehicle or have the rear axle weight checked rather than selecting a spring purely on the desired lift height.

Recommended Setup

For the best result, rear coil springs should be selected as part of a complete suspension system, rather than as an isolated upgrade.

For a Prado 250 being built for serious touring or off-road use, we recommend considering:

• Dobinsons C59-821V 45mm Raised Rear Coil Springs
• 350–550kg constant rear load
• Dobinsons MRR 3-Way Adjustable Remote Reservoir Rear Shock Absorbers
• Correctly matched front coil springs based on the vehicle's front constant load
• Dobinsons MRR 3-Way Adjustable Remote Reservoir Front Struts
• Dobinsons Prado 250 Front Coil Springs
• Professional suspension installation
• Wheel alignment following installation

Correct spring selection should always be based on the vehicle's actual accessory and constant load rather than simply choosing a spring based on the desired lift height.

Need help choosing the right Prado 250 suspension setup? Contact BushSkinz 4x4 and we can help you select components to suit your vehicle's intended use and load.

Technical Specifications

What's Included?

• 2 x Dobinsons C59-821V Rear Coil Springs

Sold as a pair.

Shock absorbers and other suspension components are not included unless specifically stated in the product listing.

Frequently Asked Questions

What Prado 250 models do these springs fit?

The Dobinsons C59-821V rear coil springs are listed for the Toyota LandCruiser Prado 250 Series from 2024 onwards.

How much lift do these springs provide?

The C59-821V is listed by Dobinsons as providing approximately 45mm of raised height.

What load are these springs designed for?

The C59-821V is designed for a 350–550kg constant rear load. This refers to weight that is consistently carried by the vehicle rather than temporary or occasional loads.

Are these springs variable rate?

Yes. The C59-821V uses a variable-rate spring design, making it suitable for Prado 250s that need substantial load-carrying capacity while maintaining controlled suspension behaviour.

Are these springs sold individually?

No. The C59-821V is supplied as a pair of rear coil springs. One pair is required per vehicle.

Are these suitable for a Prado 250 with rear drawers and touring equipment?

They can be an appropriate choice where the Prado's constant rear load falls within the 350–550kg range. We recommend calculating the actual constant rear load before selecting the spring rate.

Can I use these with Dobinsons MRR rear shocks?

Yes. The C59-821V can form part of a matched Dobinsons suspension setup using compatible Dobinsons rear shock absorbers. Matching the spring rate and shock absorber to the vehicle's actual load and intended use is recommended.

Can I use these with Dobinsons MRR front struts?

Yes. The C59-821V rear springs can be used as part of a complete Prado 250 suspension setup with compatible Dobinsons front suspension components, including the Dobinsons MRR 3-Way Adjustable Remote Reservoir Front Struts.

Will I need a wheel alignment after fitting?

Yes. A professional wheel alignment is recommended after installing raised suspension components.

Dobinsons Warranty

Dobinsons Spring & Suspension provides a 2-year warranty on coil springs, subject to their warranty terms and conditions.

Dobinsons specifically states that its catalogue coil springs have a 2-year warranty against:

• Faulty manufacture
• Breakage
• Sagging, defined as a loss of free height of more than 10mm

Warranty claims must be made in writing within two years from the date of invoice, and the product may need to be returned for inspection before a warranty repair or replacement is approved.

Dobinsons' warranty conditions also exclude products used in extreme sports or competition racing, vehicles producing 50mm or more of lift, and products that have been incorrectly installed, modified, misused, abused, altered or used under abnormal conditions.

Dobinsons also states that coil springs and shock absorbers are not covered where additional coil or strut spacers are fitted to a coil-over type assembly.

For complete warranty conditions, please refer to the Dobinsons Spring & Suspension Warranty Terms & Conditions.

Upgrade Your Prado 250 Suspension

If you're building your Toyota LandCruiser Prado 250 for touring, towing or serious off-road use, selecting the correct rear spring rate is one of the most important parts of getting the suspension setup right.

The Dobinsons C59-821V rear coil springs provide approximately 45mm of raised height and are designed for a 350–550kg constant rear load, making them a strong option for heavily equipped Prado 250s carrying substantial touring weight.

Pair them with correctly matched Dobinsons MRR front struts, front coil springs and compatible rear shock absorbers to create a complete Prado 250 suspension setup designed around your vehicle's actual load and intended use.

Build your Prado 250 for the way you actually use it – and choose your spring rate accordingly.

Dobinsons C59-821V at a glance

45mm Raised Height | 350–550kg Constant Load | Variable Rate | Rear | Sold as a Pair | Prado 250 2024-Onwards